01 Size and shape
Small holes are filled. Larger ones need backing and a new piece of board. Past a certain size, it is simpler to replace a whole section to the nearest framing.
Shape matters too. A long crack takes more taping than a round hole of the same area.
02 Wall or ceiling
Ceiling work is slower. Everything is done overhead, compound has to stay on, and staging or a plank may be needed.
Ceiling patches are also lit from the side by windows, which shows every ridge. So they get extra feathering.
03 Getting to it
A patch at waist height in an empty room is the simple case. A stairwell wall, a vaulted ceiling or a closet packed full takes longer to reach and protect.
Moving furniture before the visit helps. So does clearing a path from the door.
04 Texture
Smooth walls need the widest feathering. Knockdown and orange peel need a spray or roller pass and a test first.
Plaster is its own case. A skim coat or a sand-finish top coat takes more time than drywall mud.
05 Moisture
Water changes the job. Damp board must dry out before anything is closed up, which can mean an extra visit.
After an ice dam or a basement seep, the damp area is often bigger than the stain. Cut-outs tend to grow once the board is opened.
06 Lath walls downtown
Homes near downtown Owatonna include plaster over lath. Loose plaster has to be re-fastened before a crack is taped, and old paint may call for dust control before sanding.
Both add time compared with a newer drywall wall.
07 Paint
Primer alone is the lightest finish. Painting the patch only can leave a visible square if the wall paint has faded.
Painting the whole wall, corner to corner, is the cleanest result and adds the most time.
08 How many repairs
Setup, protection and cleanup happen once per visit. Doing several repairs together spreads that across all of them.
Landlords between tenants often save the most this way, with every room open at once.
09 Drying time and visits
Joint compound is applied in thin layers, and every layer needs to dry before another goes on. A patch that looks simple may still need two or three trips.
Basements and humid summer weeks slow that drying. Winter air, with the furnace running, speeds it up. Fewer visits usually means a smaller bill.
Setting compound, a powder mixed with water that hardens chemically, can shorten the wait on some jobs. It is harder to sand, so it is used where it fits.
10 What you can do to keep it simple
Clear the area. Move furniture, take down pictures and empty shelves near the damage before the visit.
Send a photo with something for scale, such as a hand-sized object or a tape measure. A clear picture lets the quote be closer to the real job.
Fix the source first. A roof, a pipe or a drain that still leaks will undo any wall repair.
Keep your paint. The original can, or at least its label, saves time matching the color later.
And list everything at once. A hole in the hall, a crack over a door and a stain in a bedroom can share one setup if they are all known before the visit.
Specific examples by problem are on the pages for patching holes in drywall and ceilings stained by ice dams. Other notes live in the rest of the advice center.